#
# This file is your local configuration file and is where all local user settings
# are placed. The comments in this file give some guide to the options a new user
# to the system might want to change but pretty much any configuration option can
# be set in this file. More adventurous users can look at local.conf.extended
# which contains other examples of configuration which can be placed in this file
# but new users likely won't need any of them initially.
#
# Lines starting with the '#' character are commented out and in some cases the
# default values are provided as comments to show people example syntax. Enabling
# the option is a question of removing the # character and making any change to the
# variable as required.

#
# Machine Selection
#
# You need to select a specific machine to target the build with. There are a selection
# of emulated machines available which can boot and run in the QEMU emulator:
#
#MACHINE ?= "qemuarm"
#MACHINE ?= "qemuarm64"
#MACHINE ?= "qemumips"
#MACHINE ?= "qemumips64"
#MACHINE ?= "qemuppc"
#MACHINE ?= "qemux86"
#MACHINE ?= "qemux86-64"
#
# There are also the following hardware board target machines included for 
# demonstration purposes:
#
#MACHINE ?= "beaglebone"
#MACHINE ?= "genericx86"
#MACHINE ?= "genericx86-64"
#MACHINE ?= "mpc8315e-rdb"
#MACHINE ?= "edgerouter"
#
# This sets the default machine to be qemux86 if no other machine is selected:
MACHINE ??= "qemux86"

#
# Where to place downloads
#
# During a first build the system will download many different source code tarballs
# from various upstream projects. This can take a while, particularly if your network
# connection is slow. These are all stored in DL_DIR. When wiping and rebuilding you
# can preserve this directory to speed up this part of subsequent builds. This directory
# is safe to share between multiple builds on the same machine too.
#
# The default is a downloads directory under TOPDIR which is the build directory.
#
#DL_DIR ?= "${TOPDIR}/downloads"

#
# Where to place shared-state files
#
# BitBake has the capability to accelerate builds based on previously built output.
# This is done using "shared state" files which can be thought of as cache objects
# and this option determines where those files are placed.
#
# You can wipe out TMPDIR leaving this directory intact and the build would regenerate
# from these files if no changes were made to the configuration. If changes were made
# to the configuration, only shared state files where the state was still valid would
# be used (done using checksums).
#
# The default is a sstate-cache directory under TOPDIR.
#
#SSTATE_DIR ?= "${TOPDIR}/sstate-cache"

#
# Where to place the build output
#
# This option specifies where the bulk of the building work should be done and
# where BitBake should place its temporary files and output. Keep in mind that
# this includes the extraction and compilation of many applications and the toolchain
# which can use Gigabytes of hard disk space.
#
# The default is a tmp directory under TOPDIR.
#
#TMPDIR = "${TOPDIR}/tmp"

#
# Default policy config
#
# The distribution setting controls which policy settings are used as defaults.
# The default value is fine for general Yocto project use, at least initially.
# Ultimately when creating custom policy, people will likely end up subclassing 
# these defaults.
#
DISTRO ?= "poky"
# As an example of a subclass there is a "bleeding" edge policy configuration
# where many versions are set to the absolute latest code from the upstream 
# source control systems. This is just mentioned here as an example, its not
# useful to most new users.
# DISTRO ?= "poky-bleeding"

#
# Package Management configuration
#
# This variable lists which packaging formats to enable. Multiple package backends
# can be enabled at once and the first item listed in the variable will be used
# to generate the root filesystems.
# Options are:
#  - 'package_deb' for debian style deb files
#  - 'package_ipk' for ipk files are used by opkg (a debian style embedded package manager)
#  - 'package_rpm' for rpm style packages
# E.g.: PACKAGE_CLASSES ?= "package_rpm package_deb package_ipk"
# We default to rpm:
PACKAGE_CLASSES ?= "package_rpm"

#
# SDK target architecture
#
# This variable specifies the architecture to build SDK items for and means
# you can build the SDK packages for architectures other than the machine you are
# running the build on (i.e. building i686 packages on an x86_64 host).
# Supported values are i686 and x86_64
#SDKMACHINE ?= "i686"

#
# Extra image configuration defaults
#
# The EXTRA_IMAGE_FEATURES variable allows extra packages to be added to the generated
# images. Some of these options are added to certain image types automatically. The
# variable can contain the following options:
#  "dbg-pkgs"       - add -dbg packages for all installed packages
#                     (adds symbol information for debugging/profiling)
#  "dev-pkgs"       - add -dev packages for all installed packages
#                     (useful if you want to develop against libs in the image)
#  "ptest-pkgs"     - add -ptest packages for all ptest-enabled packages
#                     (useful if you want to run the package test suites)
#  "tools-sdk"      - add development tools (gcc, make, pkgconfig etc.)
#  "tools-debug"    - add debugging tools (gdb, strace)
#  "eclipse-debug"  - add Eclipse remote debugging support
#  "tools-profile"  - add profiling tools (oprofile, lttng, valgrind)
#  "tools-testapps" - add useful testing tools (ts_print, aplay, arecord etc.)
#  "debug-tweaks"   - make an image suitable for development
#                     e.g. ssh root access has a blank password
# There are other application targets that can be used here too, see
# meta/classes/image.bbclass and meta/classes/core-image.bbclass for more details.
# We default to enabling the debugging tweaks.
EXTRA_IMAGE_FEATURES ?= "debug-tweaks"

#
# Additional image features
#
# The following is a list of additional classes to use when building images which
# enable extra features. Some available options which can be included in this variable
# are:
#   - 'buildstats' collect build statistics
#   - 'image-mklibs' to reduce shared library files size for an image
#   - 'image-prelink' in order to prelink the filesystem image
#   - 'image-swab' to perform host system intrusion detection
# NOTE: if listing mklibs & prelink both, then make sure mklibs is before prelink
# NOTE: mklibs also needs to be explicitly enabled for a given image, see local.conf.extended
USER_CLASSES ?= "buildstats image-mklibs image-prelink"

#
# Runtime testing of images
#
# The build system can test booting virtual machine images under qemu (an emulator)
# after any root filesystems are created and run tests against those images. To
# enable this uncomment this line. See classes/testimage(-auto).bbclass for
# further details.
#TEST_IMAGE = "1"
#
# Interactive shell configuration
#
# Under certain circumstances the system may need input from you and to do this it
# can launch an interactive shell. It needs to do this since the build is
# multithreaded and needs to be able to handle the case where more than one parallel
# process may require the user's attention. The default is iterate over the available
# terminal types to find one that works.
#
# Examples of the occasions this may happen are when resolving patches which cannot
# be applied, to use the devshell or the kernel menuconfig
#
# Supported values are auto, gnome, xfce, rxvt, screen, konsole (KDE 3.x only), none
# Note: currently, Konsole support only works for KDE 3.x due to the way
# newer Konsole versions behave
#OE_TERMINAL = "auto"
# By default disable interactive patch resolution (tasks will just fail instead):
PATCHRESOLVE = "noop"

#
# Disk Space Monitoring during the build
#
# Monitor the disk space during the build. If there is less that 1GB of space or less
# than 100K inodes in any key build location (TMPDIR, DL_DIR, SSTATE_DIR), gracefully
# shutdown the build. If there is less that 100MB or 1K inodes, perform a hard abort
# of the build. The reason for this is that running completely out of space can corrupt
# files and damages the build in ways which may not be easily recoverable.
# It's necesary to monitor /tmp, if there is no space left the build will fail
# with very exotic errors.
BB_DISKMON_DIRS = "\
    STOPTASKS,${TMPDIR},1G,100K \
    STOPTASKS,${DL_DIR},1G,100K \
    STOPTASKS,${SSTATE_DIR},1G,100K \
    STOPTASKS,/tmp,100M,100K \
    ABORT,${TMPDIR},100M,1K \
    ABORT,${DL_DIR},100M,1K \
    ABORT,${SSTATE_DIR},100M,1K \
    ABORT,/tmp,10M,1K"

#
# Shared-state files from other locations
#
# As mentioned above, shared state files are prebuilt cache data objects which can
# used to accelerate build time. This variable can be used to configure the system
# to search other mirror locations for these objects before it builds the data itself.
#
# This can be a filesystem directory, or a remote url such as http or ftp. These
# would contain the sstate-cache results from previous builds (possibly from other
# machines). This variable works like fetcher MIRRORS/PREMIRRORS and points to the
# cache locations to check for the shared objects.
# NOTE: if the mirror uses the same structure as SSTATE_DIR, you need to add PATH
# at the end as shown in the examples below. This will be substituted with the
# correct path within the directory structure.
#SSTATE_MIRRORS ?= "\
#file://.* http://someserver.tld/share/sstate/PATH;downloadfilename=PATH \n \
#file://.* file:///some/local/dir/sstate/PATH"


#
# Qemu configuration
#
# By default qemu will build with a builtin VNC server where graphical output can be
# seen. The two lines below enable the SDL backend too. By default libsdl-native will
# be built, if you want to use your host's libSDL instead of the minimal libsdl built
# by libsdl-native then uncomment the ASSUME_PROVIDED line below.
PACKAGECONFIG_append_pn-qemu-native = " sdl"
PACKAGECONFIG_append_pn-nativesdk-qemu = " sdl"
#ASSUME_PROVIDED += "libsdl-native"

# CONF_VERSION is increased each time build/conf/ changes incompatibly and is used to
# track the version of this file when it was generated. This can safely be ignored if
# this doesn't mean anything to you.
CONF_VERSION = "1"

# # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # #
# fragment { 
# /w/workspace/release-jjb-guppy-snapshot/MACHINE/qemux86-64/label/agl-test-slave/repoclone/meta-agl/templates/base/00_local.conf.agl.inc
#
# AGL global configuration options
#---------------------------------

# Set DISTRO for AGL
DISTRO = "poky-agl"

#see meta-agl/meta-agl/conf/include/base-agl.inc
require conf/include/base-agl.inc

#see meta-agl/meta-app-framework/conf/include/agl-appfw-smack.inc
require conf/include/agl-appfw-smack.inc
#
# }
# # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # #

# # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # #
# fragment { 
# /w/workspace/release-jjb-guppy-snapshot/MACHINE/qemux86-64/label/agl-test-slave/repoclone/meta-agl-demo/templates/feature/agl-demo/50_local.conf.inc
#
#see meta-agl-demo/conf/include/agl-demo.inc
require conf/include/agl-demo.inc
#
# }
# # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # #

# # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # #
# fragment { 
# /w/workspace/release-jjb-guppy-snapshot/MACHINE/qemux86-64/label/agl-test-slave/repoclone/meta-agl-devel/templates/feature/agl-audio-4a-framework/50_local.conf.inc
#
#see meta-agl-devel/meta-audio-4a-framework/conf/include/agl-audio-4a-framework.inc
require conf/include/agl-audio-4a-framework.inc
#
# }
# # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # #

# # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # #
# fragment { 
# /w/workspace/release-jjb-guppy-snapshot/MACHINE/qemux86-64/label/agl-test-slave/repoclone/meta-agl-devel/templates/feature/agl-hmi-framework/50_local.conf.inc
#
# In order to enable the hmi-framework features ,
# enables the following line:
#
DISTRO_FEATURES_append = " agl-hmi-framework"
PREFERRED_RPROVIDER_virtual/navigation = "navigation"
#
# }
# # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # #

# # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # #
# fragment { 
# /w/workspace/release-jjb-guppy-snapshot/MACHINE/qemux86-64/label/agl-test-slave/repoclone/meta-agl/templates/feature/agl-appfw-smack/50_local.conf.inc
#
#
# }
# # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # #

# # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # #
# fragment { 
# /w/workspace/release-jjb-guppy-snapshot/MACHINE/qemux86-64/label/agl-test-slave/repoclone/meta-agl/templates/feature/agl-buildstats/50_local.conf.inc
#
INHERIT += "buildstats"
INHERIT += "buildstats-summary"
#
# }
# # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # #

# # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # #
# fragment { 
# /w/workspace/release-jjb-guppy-snapshot/MACHINE/qemux86-64/label/agl-test-slave/repoclone/meta-agl/templates/feature/agl-devel/50_local.conf.inc
#
#see meta-agl/meta-agl/conf/include/agl-devel.inc
require conf/include/agl-devel.inc
#
# }
# # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # #

# # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # #
# fragment { 
# /w/workspace/release-jjb-guppy-snapshot/MACHINE/qemux86-64/label/agl-test-slave/repoclone/meta-agl/templates/feature/agl-netboot/50_local.conf.inc
#
#see meta-agl/meta-netboot/conf/include/agl-netboot.inc
require conf/include/agl-netboot.inc
#
# }
# # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # #

# # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # #
# fragment { 
# /w/workspace/release-jjb-guppy-snapshot/MACHINE/qemux86-64/label/agl-test-slave/repoclone/meta-agl/templates/feature/agl-pulseaudio/50_local.conf.inc
#
#see meta-agl/meta-agl-profile-core/conf/include/agl-pulseaudio.inc
require conf/include/agl-pulseaudio.inc
#
# }
# # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # #

# # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # #
# fragment { 
# /w/workspace/release-jjb-guppy-snapshot/MACHINE/qemux86-64/label/agl-test-slave/repoclone/meta-agl/templates/machine/qemux86-64/50_local.conf.inc
#
MACHINE = "qemux86-64"
#see meta-agl/meta-agl-bsp/conf/include/agl_qemux86-64.inc
require conf/include/agl_qemux86-64.inc
#
# }
# # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # #

# # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # #
# fragment { 
# /w/workspace/release-jjb-guppy-snapshot/MACHINE/qemux86-64/label/agl-test-slave/repoclone/meta-agl/templates/feature/agl-ptest/90_local.conf.inc
#

# Enabling ptest in image ...

OVERRIDES .= ":agl-ptest"
EXTRA_OECMAKE_append = " -DBUILD_TEST_WGT=TRUE"
DISTRO_FEATURES_append = " ptest"
EXTRA_IMAGE_FEATURES_append = " ptest-pkgs"

# / ptest
#
# }
# # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # #

# # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # #
# fragment { 
# /w/workspace/release-jjb-guppy-snapshot/MACHINE/qemux86-64/label/agl-test-slave/repoclone/meta-agl/templates/base/99_local.conf.inc
#
########################
# AGL DISTRO VARIABLES #
########################

# ARM 32bit 'medium' compiler (armv7thf instead of armv7ve)
# (only use for CPUs <= cortex-a9 / w/o virt extension - e.g. cortex-a8)
# DISTRO_FEATURES_append = " agl-medium-arm-compiler"


######################
# AGL USER VARIABLES #
######################

# Add additional IMAGE_FSTYPES here on-top of the default ext4.xz and tar.xz
#AGL_EXTRA_IMAGE_FSTYPES = ""

# Additional free disk space created in the image in Kbytes.
#IMAGE_ROOTFS_EXTRA_SPACE="524288"

#
# }
# # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # #

# # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # #
# fragment { 
# /dev/stdin
#
# generated by /w/workspace/release-jjb-guppy-snapshot/MACHINE/qemux86-64/label/agl-test-slave/repoclone/meta-agl/scripts/.aglsetup_genconfig.bash
DISTRO_SETUP_MANIFEST = "/w/workspace/release-jjb-guppy-snapshot/MACHINE/qemux86-64/label/agl-test-slave/repoclone/output/aglsetup.manifest"
DISTRO_MANIFEST_GENERATOR = "/w/workspace/release-jjb-guppy-snapshot/MACHINE/qemux86-64/label/agl-test-slave/repoclone/meta-agl/scripts/distro-manifest-generator.sh"
#
# }
# # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # #

### ADDED BY AUTOBUILDER ###


# Archiver setup
INHERIT += "archiver"
ARCHIVER_MODE[src] = "original"
COPYLEFT_LICENSE_INCLUDE = "*"
COPYLEFT_LICENSE_EXCLUDE += "CLOSED Proprietary Custom Firmware-* Freescale-* NXP-* TI TI-*"

# CI: Enabling ptest in image ... 
DISTRO_FEATURES_append = " ptest"
EXTRA_IMAGE_FEATURES_append = " ptest-pkgs"
DISTRO_FEATURES_append = " AGLCI"
IMAGE_FSTYPES += "vmdk"
KERNEL_IMAGETYPE_raspberrypi3 := "uImage"
